STA-PUT Contact adhesive spray 600ml

Surfaces intended for bonding should be dry and free from dirt, grease, oil and any other contamination.

STA-PUT should be applied to both surfaces to be glued. Spray the adhesive evenly to achieve 80% – 100% coverage. Avoid excess glue. Wait 2-3 minutes for the solvent to evaporate.

Evaporates instantly! Instant grip!

In the case of porous surfaces, it is recommended to apply a second layer of adhesive. To ensure maximum bond strength, the glued substrates should be pressed thoroughly and evenly over the entire surface after joining.

The adhesive reaches its full bond strength after 24 hours. Please note that in order to achieve a good bond, the adhesive and substrates should be at a temperature of 16C or higher.