Kiilto Pro Lightfix flexible cementitious adhesive with lightweight filler 15kg
21.47€ 17.60€ excl. VAT
A non-sagging, economical flexible cementitious adhesive for setting ceramic tiles and particularly large wall tiles. Also for exterior applications. C2TES1.
- fast, easy to apply, good coverage
- ceramic tiles, large wall tiles, decoration stones, stones and marble
- coverage 1.5-2.2 kg/m²
- grouting: walls 8 h, floors 12 h
- for interior and exterior areas
Description
Kiilto Pro Lightfix is a non-sagging, economical and light cementitious adhesive for setting ceramic tiles and stones, which are not moisture-sensitive, on vinyl, paint, tile, clinker and common aggregate surfaces as well as on surfaces treated with Kiilto waterproofing membranes or Kiilto Kosteussulku moisture barrier, e.g., gypsum boards. Jointing can be done without a joint string. Suitable for interior and exterior use. Not suitable for areas permanently under water (e.g., swimming pools).
The surfaces to be tiled must be clean and free from dust. Remove water-soluble smoothing and levelling compounds. Dry and absorbent surfaces must be moistened with water or primed with thinned Kiilto Strat Primer. Board surfaces are treated with unthinned Start Primer. Turn off floor heating approx. 24 hours prior to tiling. When tiling on vinyl, paint, tile and clinker substrates:
– ensure that the surface is solid and strong for tiling
– ensure that the surface to be tiled adheres properly to its own substrate
– remove wax, grease and dirt from the surface with Kiilto Maalarinpesu cleaner and rinse well. After the surface has dried, sand it, if necessary, and then remove the sanding dust.
