KIILTO PRO ELASTIC FIX S1 UNIVERSAL TILE ADHESIVE FOR LARGE-FORMAT TILES AND MOST TILING APPLICATIONS

Description

Kiilto Pro Elastic Fix S1 is a non-sag, cement-based tile adhesive for installing ceramic and clinker tiles, lightweight concrete blocks and moisture-insensitive natural stone on surfaces covered with vinyl, paint, tiles or clinker tiles, as well as on conventional mineral surfaces. It is also suitable for surfaces treated with Kiilto waterproofing mastic or Kiilto Pro Moisture Proof moisture barrier.

Tiles can be installed without spacers. Suitable for indoor and outdoor use. Not suitable for tiling surfaces that are permanently submerged in water, such as swimming pools.

The surfaces to be tiled must be clean and free of dust. Remove water-based finishing and levelling compounds. Dry and absorbent surfaces must be dampened with water or primed with Kiilto Pro Start Primer diluted 1:4 with water. Construction board surfaces must be treated with undiluted Kiilto Pro Start Primer. Smooth and non-absorbent surfaces must be primed with Kiilto Pro Fix Primer.

Switch off underfloor heating approximately 24 hours before tiling and switch it back on one week after grouting.

When tiling vinyl, painted, ceramic tile or clinker tile surfaces, ensure that:

• The surface is sufficiently strong for tiling.
• The existing floor or wall covering is firmly bonded to the substrate.
• Wax, grease and dirt are removed using Kiilto Pro Prepaint Cleaner, and the surface is rinsed thoroughly. Once dry, sand if necessary and remove all sanding dust.