• FREE DELIVERY from €200

  • Kiilto Maxirapid Fast-setting screed 1-30mm 20kg

    23.91 19.60 excl. VAT

    An extra fast curing levelling screed for levelling floors, filling and patching gaps and making floor slopes. Ready to receive a floor covering as soon as 2 h after levelling. Suitable to be used under paint or epoxy. Also for exterior applications. Low alkali. Cementitious.

    •  very fast, paintable
    • floor corrections, slopes and patchings
    •  coverage 1.6 kg/m²/mm
    •  walkable: 45 min
    •  coatable: 2 h
    •  interior and exterior areas

    TARNE 2-3 PÄEVA / DELIVERY IN 2-3 DAYS / TOIMITUS 2-3 PÄIVÄSSÄ

    Description

    Extra fast curing levelling screed for levelling floors, filling and patching gaps and making floor slopes before over levelling and/or laying the floor covering, at thicknesses of 1–30 mm. For over levellings we recommend using, e.g., Kiilto 97 DF, TopPlan DF or Tasoflex levelling compounds. Suitable for interior and exterior use. In exterior applications, minimum layer thickness is 5 mm.
    The substrate must be clean, solid and firm. Remove cement laitance and paint splashes, and brush or vacuum the floor thoroughly. Rough uneven areas and high ridges must be sanded before levelling.
    Concrete subfloors are pre-treated with diluted Kiilto Start Primer (10–20 % Kiilto Start Primer / 80–90 % water) prior to application of the floor screed. Surfaces under reconstruction as well as board surfaces must be primed with undiluted Kiilto Start Primer before levelling. In outdoor applications and with non-absorbent substrates prime the substrate with Kiilto Fix Primer or make a bond bridge with, e.g., Kiilto Saneerauslaasti cementitious adhesive with a notched trowel. In ground supported structures, the capillary rise of moisture must be prevented.
    The concrete substrate must comply with national standards (in Finland SisäRYL 2013 and BY 45).