KIILTO PRO XL FIX 20KG S2 TILE ADHESIVE FOR LARGE TILES – REQUEST A QUOTE!
A dust reduced, very flexible cementitious adhesive ideal for setting large ceramic floor tiles and stones in dry and wet areas. Also for exterior applications. C2ES2.
- Deformation > 5 mm (EN 12002)
- Working time approx. 3 h
- Open time approx. 30 min
- Grouting: porous substrates 24 h, dense substrates 48 h
- Coverage 1,5–3,3 kg/m²
- Frost-resistant
Description
Very flexible tiling adhesive designed for fixing large ceramic tiles and stones, which are not moisture sensitive, on traditional aggregate, painted and clinker floors as well as gypsum and fibre cement boards. When tiling on a board subfloor, ensure that it is rigid enough. Flexible Kiilto Pro XL Fix provides a good bond between the tiles and adhesive. The product produces almost no dust during the mixing process. Suitable to be used in combination with Kiilto waterproofing membranes. Suitable for walls and floors for interior and exterior use, but not for applications that are constantly under water (e.g., swimming pools).
The surfaces to be tiled must be clean, solid and free from dust. Remove water-soluble smoothing and levelling compounds. Absorbent surfaces must be primed with Kiilto Pro Start Primer or Kiilto PrimerOne 1:4 diluted to water. Dense and smooth surfaces must be primed with Kiilto Pro Fix Primer. Boards are primed with undiluted Kiilto Pro Start Primer. Turn off floor heating approx. 24 hours prior to tiling and can be turned back on one week after grouting. When tiling on painted surface and clinker (only interior areas) ensure that the material is properly adhered to its substrate. Wax, grease and dirt must be removed from the surface to be tiled with Kiilto Pro Prepaint cleaner and rinsed thoroughly. After the surface has dried, sand it and remove the sanding dust.
