ROMUS “METACLOU” FLUTED TACTILE STUDS Ø25MM H=5MM TO BE SEALED

Description

• There are three possible types of installation, depending on the floor type:
  – On hard floor (granite, marble, concrete etc.).
  Install stud using plug ref. 4362
  Drill the substrate using a Ø 11 mm masonry bit to a depth of 30 mm.
  Position the stud in the plug and drive home using a rubber mallet.
  – On semi-consolidated substrate (asphalt, deactivated concrete)
  Fit studs without plugs.
  Drill the substrate using a Ø 10 mm masonry bit to a depth of 25 mm.
  Apply a two-pack sealing resin and then insert the stud.
  – On wood, fit studs without plugs.
  Apply an outdoor-quality wood-metal neoprene adhesive, then insert the stud.